自上料搅拌车有哪些常见故障要知道的
自上料搅拌车是生产混凝土的主要设备，如果混凝土搅拌机出现故障，就无法生产混凝土，也会耽误工程的运行，自上料搅拌车常见的故障有哪些？下面自上料搅拌车厂家为您讲解。
The self loading mixer is the main equipment for concrete production. If the concrete mixer fails, it will not be able to produce concrete and will also delay the operation of the project. What are the common failures of the self loading mixer? Next, the manufacturer of the loading mixer will explain it to you.
电机或减速机过热。自上料搅拌车出现电机或减速机过热现象时，应该对电机与减速机的胶带轮进行详细检查，观察他们是否共面，三角胶带的张紧是否还正常，有没有其他的外力造成有额外负载；
Motor or reducer overheating. When the motor or reducer of the feeding mixer is overheated, the belt pulley of the motor and reducer shall be checked in detail to see whether they are coplanar, whether the tension of the V-belt is normal, and whether there is additional load caused by other external forces;
其次对电机或减速机的表面进行检查，观察是否有覆盖物在上面，从而导致温度不能正常散热；在对平行轴装式斜齿轮减速机的油进行检查，观察油位是否正常，特别是润滑油有没有被污染，一旦有这些现象的出现，就要按照相应的标准要求进行加油或换油。
Secondly, check the surface of the motor or reducer to see if there is any covering on it, which may lead to abnormal heat dissipation; Check the oil of parallel shaft mounted helical gear reducer to see whether the oil level is normal, especially whether the lubricating oil is polluted. Once these phenomena occur, oil shall be added or replaced according to the corresponding standard requirements.
当然自上料搅拌车的漏斗是需要我们进行及时清理的，如果我们清理不及时就回去导致我们的物料输送不流畅，导致搅拌装置发生故障时，要及时的减修复。
Of course, we need to clean the hopper of the feeding mixer in time. If we do not clean it in time, we will go back to the mixer, causing our material delivery to be not smooth, which will lead to the failure of the mixing device, we need to repair it in time.
对于司机来说，我们应该进行正规化的擦走，即使是在下班的过程中，我们也应该进行淡定的配合，当完成浇筑任务时，操作工压迫采取相应的配合，保证在收回布料杆，在进行停止我们的工作。
For the driver, we should carry out standardized wiping. Even in the process of getting off work, we should also carry out calm cooperation. When the pouring task is completed, the operator should press and take corresponding cooperation to ensure that we can stop our work when the boom is withdrawn.
自上料搅拌车在进行生产的过程中，我们应该充分的根据我们的操作和相关的操作经验进行操作，防止操作失误，影响我们的工作。
In the process of production of self loading mixer, we should fully operate according to our operation and relevant operating experience to prevent operation errors from affecting our work.
自上料搅拌车生产完成后需要人员定期进入清理，此是比较危险的作业，常出现工伤事故，进入主机内一定要先拉闸，确定停电后再作业。更多相关注意事项就来我们网站https://www.jfjiaobanche.com进行咨询了解吧！
Since the completion of the production of the loading mixer, personnel are required to enter and clean it regularly. This is a relatively dangerous operation, and industrial accidents often occur. When entering the main machine, you must first pull the brake, and then work after confirming the power failure. More relevant precautions come to our website https://www.jfjiaobanche.com Consult and understand!
下一篇：自上料搅拌车的优势及其操作注意事项上一篇：混凝土自上料搅拌车的五点作用
