自上料搅拌车厂家直销

品质创造未来,爱上中科聚峰造

全国咨询热线
400-879-1999
当前位置:首页 »新闻中心 » 公司新闻自动搅拌车轮边减速器的工作原理!

自动搅拌车轮边减速器的工作原理!

来源:https://www.jfjiaobanche.com 浏览:0发表时间:2021-03-19
搅拌车在车轮边上有个减速器,是传动系中后一级减速增扭装置,下面我们说说这个减速器的工作原理。
There is a reducer on the side of the wheel of Zhongke mixer, which is the second stage deceleration and torque increasing device in the transmission system. Let's talk about the working principle of this reducer.
轮边减速器采用轮边减速器可满足在总传动比相同的条件下,使变速器、传动轴、主减速器、差速器、半轴等部件的载荷减少,尺寸变小以及使驱动桥获得较大的离地间隙等优点,它被广泛应用于载重货车、大型搅拌车、越野汽车及其他一些大型工矿用车。因此对轮边减速器的研究,具有很重要的实际意义和企业实用性。
With the same total transmission ratio, the wheel reducer can reduce the load of transmission, transmission shaft, main reducer, differential, half shaft and other parts, reduce the size, and make the drive axle get larger ground clearance. It is widely used in trucks, large mixer, off-road vehicles and other large industrial and mining vehicles. Therefore, the research of wheel reducer has very important practical significance and enterprise practicability.
目前采用的轮边减速器,就是为满足整个传动系统匹配的需要,而增加的一套降速增扭的齿轮传动装置。安装在搅拌车动力输出终端,减轻变速箱负载。采用轮边减速器是为了提高搅拌车的驱动力,以满足或修正整个传动系统驱动力的匹配。
              中科搅拌车
At present, the wheel reducer is a set of gear transmission device which can reduce the speed and increase the torque to meet the matching needs of the whole transmission system. It is installed at the power output terminal of mixer to reduce the load of gearbox. The purpose of using wheel reducer is to improve the driving force of Zhongke mixer truck, so as to meet or modify the matching of driving force of the whole transmission system.
发动机点火经离合器、变速器和分动器把动力传递到前、后桥的主减速器,再从主减速器的输出端传递到轮边减速器及车轮,以驱动混凝土搅拌车行驶。在这一过程中,轮边减速器的工作原理就是把主减速器传递的转速和扭矩经过其降速增扭后,再传递到车轮,以便使车轮在地面附着力的反作用下,产生较大驱动力。
The engine ignition transmits the power to the main reducers of the front and rear axles through the clutch, transmission and transfer gears, and then from the output end of the main reducer to the wheel reducers and wheels to drive the concrete mixer. In this process, the working principle of the wheel side reducer is to transfer the speed and torque transmitted by the main reducer to the wheel after its speed reduction and torque increase, so as to make the wheel produce greater driving force under the reaction of the ground adhesion.
以上就是搅拌车轮边减速器的工作原理,相信大家已经有所了解。如果您想要了解更多资讯,欢迎致电咨询网站https://www.jfjiaobanche.com
The above is the working principle of Zhongke mixing wheel reducer, I believe you have some understanding. If you want to know more, please call our website https://www.jfjiaobanche.com .