自上料搅拌车厂家直销

品质创造未来,爱上中科聚峰造

全国咨询热线
400-879-1999
当前位置:首页 »新闻中心 » 公司新闻 » 自上料搅拌车的优势及其操作注意事项

自上料搅拌车的优势及其操作注意事项

来源:https://www.jfjiaobanche.com 浏览:发表时间:2022-09-23
随着时代的发展,生产越来越机械化,智能化,自上料搅拌车的使用为更多人所接受,下面自上料搅拌车厂家就来讲讲该设备的使用优势以及操作的注意事项。
With the development of the times, the production is becoming more mechanized and intelligent, and the use of self feeding mixer is accepted by more people. The following is the introduction of the advantages of the equipment and the precautions for operation from the manufacturer of the charging mixer.
自上料搅拌车的优势:
Advantages of self feeding mixer:
1、具有装载、搅拌和运输三种功能
1. It has three functions of loading, mixing and transportation
自上料搅拌车把装载机、混凝土搅拌车和运输车这三种机械整合到了一起,所以同时拥有三个功能,自己就能完成装载、搅拌和运输这三个步骤,所以工作效率比起传统的混凝土搅拌车高了不少。
The self loading mixer integrates the loader, concrete mixer and transport vehicle, so it has three functions at the same time. It can complete the three steps of loading, mixing and transportation by itself, so its work efficiency is much higher than that of the traditional concrete mixer.
2、拌合的水泥质量稳定
2. The quality of mixed cement is stable
由于自上料搅拌车的自动化程度比较高,所以拌合出来的水泥标号能够得到保证,稳定性也更好。
Due to the high degree of automation of the self loading mixer, the cement grade can be guaranteed and the stability is better.
3、适用场合多
3. Many applications
由于自上料搅拌车自带水箱和水泵,所以只要在有水的地方就能抽水,适用的场合更多。
Since the self feeding mixer has its own water tank and water pump, it can pump water wherever there is water, which is applicable to more occasions.
4、操作简单,节省人力
4. Simple operation and manpower saving
由于自上料搅拌车自动化程度更高,所以操作起来比较简单,通常只需要两个人就可以工作,其他人只需要做一些辅助工作,这样就节省了不少的人力。
Since the self feeding mixer has a higher degree of automation, it is relatively simple to operate. Usually only two people can work, and others only need to do some auxiliary work, which saves a lot of manpower.
自上料搅拌车的操作注意事项:
Precautions for operation of self feeding mixer truck:
一、自动上料搅拌车应停在平地上,并将铲斗平放在地面上。当发动机熄火后,需反复多次扳动工作装置操纵手柄,确保各液压缸处于无压休息状态。如果自动上料搅拌车只能停在坡道上时,要将轮胎垫牢。
1、 The automatic feeding mixer shall be parked on the flat ground, and the bucket shall be placed on the ground. When the engine is off, pull the operating handle of the working device repeatedly to ensure that each hydraulic cylinder is in a pressure free rest state. If the automatic feeding mixer can only stop on the ramp, the tire shall be firmly padded.
二、自上料搅拌车装料前,应先排净搅拌罐内残存的积水和杂物。在运输过程中要不停的转动,以防混凝土离析。自上料搅拌车到达工地和卸料之前,应先使搅拌罐以每分钟14—18转的速度转1—2分钟,然后再进行反转卸料。反转之前,应使搅拌罐停稳不转。
2、 Before loading from the charging mixer truck, the remaining water and sundries in the mixing tank shall be drained. Keep rotating during transportation to prevent concrete segregation. Before the loading mixer truck arrives at the construction site and discharges materials, the mixing tank shall be rotated for 1-2 minutes at the speed of 14-18 revolutions per minute, and then the reverse unloading shall be carried out. Before reversing, the mixing tank shall be stopped stably.
自上料搅拌车厂家
三、环境温度如果高于25摄氏度,从装料、运输、到卸料的延续时间不得超过60分钟;如果环境温度低于25摄氏度,上述时间不得超过90分钟。
3、 If the ambient temperature is higher than 25 ℃, the duration from loading, transportation to unloading shall not exceed 60 minutes; If the ambient temperature is below 25 ℃, the above time shall not exceed 90 minutes.
四、在施工现场卸料完毕后,应立即用自上料搅拌车随车带的软管冲洗进料斗、出料斗、卸料溜槽等处,清除粘附在车身各处的污泥及混凝土。在返回搅拌站的途中,应向搅拌罐内注150L—200L的水来清洗搅拌罐壁及叶片粘结的混凝土残渣。
4、 After unloading at the construction site, the hose attached to the truck from the loading mixer shall be used to flush the feed hopper, discharge hopper, discharge chute, etc., to remove the sludge and concrete adhering to the vehicle body. On the way back to the mixing plant, 150L - 200L water shall be injected into the mixing tank to clean the concrete residue bonded by the mixing tank wall and blades.
五、每天工作结束后,司机应负责向搅拌罐内注入清水并以每分钟14—18转的速度旋转5—10分钟,然后将水排去,以保障搅拌罐内清洁。用高压水清洗搅拌罐各个部分时,应注意避开仪表及操纵杆等部位。
5、 At the end of each day's work, the driver shall be responsible for injecting clean water into the mixing tank and rotating it for 5-10 minutes at the speed of 14-18 revolutions per minute, and then draining the water to ensure the cleanness of the mixing tank. When cleaning all parts of the mixing tank with high-pressure water, avoid instruments, control rods and other parts.
此外要注意,自上料搅拌车工作时,不得将手伸入旋转的搅拌罐内,严禁将手伸入主卸料溜槽和加长卸料溜槽的连接部位,以免发生事故。更多相关内容就来我们网站https://www.jfjiaobanche.com咨询吧!
In addition, it should be noted that when the self loading mixer is working, it is not allowed to put your hand into the rotating mixing tank, and it is not allowed to put your hand into the connection part of the main discharge chute and the extended discharge chute, so as to avoid accidents. More relevant content will come to our website https://www.jfjiaobanche.com Consult!