全自动搅拌车实心轮胎造成损坏的原因！
今天就带您来了解造成全自动搅拌车实心轮胎损坏的原因，希望能给大家带来一些帮助。
Today, I will take you to understand the causes of solid tire damage of automatic mixer, hoping to bring you some help.
1、脱层，橡胶之间发生了周向裂口或着是分层。
1. Delamination, circumferential cracking or delamination between rubbers.
造成脱层的原因：
Causes of delamination:
（1）胶料中可能含有水分户或者是其他杂物，尤其是纤维胶在储运的过程中被雨水、杂物污染。
(1) Rubber may contain moisture or other debris, especially fiber glue in the process of storage and transportation by rain, debris pollution.
（2）胎胚保温不良、硫化机的温度波动造成了欠硫。
(2) The poor heat preservation of the embryo and the temperature fluctuation of the vulcanizer caused the under sulfur.
（3）胎胚成型太早而且停放时间太长，造成了胎胚胶料的自硫。
(3) The formation of embryo is too early and the storage time is too long, resulting in the self sulfur of the compound in the center of embryo.
（4）使用时超载、超速运行。
(4) When in use, it is overloaded and overspeed.
2、脱圈，发生全自动搅拌车脱圈的原因：
2. The reasons for the ring separation of the full-automatic mixer are as follows:
（1）粘合剂粘度没有达到工艺要求。
(1) The viscosity of adhesive did not meet the process requirements.
（2）涂粘合剂之后表面受到了污染。
(2) The surface was contaminated after the adhesive was applied.
（3）胎胚保温不良、硫化机的温度有波动造成了欠硫。
(3) The poor heat preservation of the embryo and the fluctuation of the temperature of the vulcanizer caused the lack of sulfur.
（4）使用时超载、超速运行。
(4) When in use, it is overloaded and overspeed.
以上就是关于全自动搅拌车实心轮胎造成损坏的原因，希望对大家有所帮助，如想了解更多资讯内容请点击官网：全自动搅拌车厂家https://www.jfjiaobanche.com。
The above is about the reasons for the damage of the solid tire of the automatic mixer. I hope it can help you. For more information, please click the official website: the manufacturer of the automatic mixer https://www.jfjiaobanche.com 。
