自上料搅拌机轴承的功能和选择
在中科自上料搅拌机中，轴承是一个非常重要的部件。它有什么功能?我们该如何选择?
Bearing is a very important part in Zhongke self feeding mixer. What function does it have? How should we choose?
中科自上料搅拌机轴承主要承受径向力，其次承受轴向力;轴承应选择两种轴向力的轴承，如角接触球轴承，圆锥滚子轴承，或推力球轴承，角接触球轴承的高速，圆锥滚子轴承或推力球轴承的动态轴承。
The bearing of Zhongke self feeding mixer mainly bears radial force, followed by axial force; two kinds of axial force bearing shall be selected for the bearing, such as angular contact ball bearing, tapered roller bearing, or thrust ball bearing, high speed of angular contact ball bearing, dynamic bearing of tapered roller bearing or thrust ball bearing.
轴承支持的角色作用,即如果直接搅拌轴配合孔,行驶阻力大,磨损大,传输不容易改变,和轴承是依靠组件间的滚动接触来支撑传动部位,因此抗滑阻力小,能耗少,开始容易,等等。
The role of bearing support, that is, if the direct mixing shaft fits the hole, the driving resistance is large, the wear is large, the transmission is not easy to change, and the bearing is supported by the rolling contact between components, so the anti sliding resistance is small, the energy consumption is small, and it is easy to start, and so on.
轴承的使用寿命决定了主轴的使用寿命，从而影响了使用寿命，在很多情况下轴承是标准，通常加工轴单元都会按照对轴强度的要求，按照标准单元生产。在轴承的选择上要选择工作平稳、噪声小的轴承，即对以上需求进行一系列的实践总结和理论核算。
The service life of the bearing determines the service life of the main shaft, thus affecting the service life. In many cases, the bearing is a national standard. Generally, the processing shaft unit will be produced according to the requirements of the shaft strength and the national standard unit. In the selection of bearings, we should choose the bearings with stable work and low noise, that is, a series of practical summary and theoretical accounting for the above needs.
为了避免滑动轴承,形成内部球滑动轴承,轴承损坏,我们确信生产深沟球轴承,内圈法兰,降低了滑动轴承表面,从而减少摩擦和热量,寿命长,精度高、热值低,建议套件,高刚性、低噪音、高耐磨性等特点。
In order to avoid sliding bearing, forming internal ball sliding bearing and bearing damage, we are sure to produce deep groove ball bearing and inner ring flange, reducing the surface of sliding bearing, thus reducing friction and heat, long service life, high accuracy, low heat value, recommended kit, high rigidity, low noise, high wear resistance and other characteristics.
看了上面的文章我们是否从给中科自上料搅拌机轴承的作用和选择中知道了，从上面我们了解到轴承是一个非常重要的部件，所以在平时使用的时候要注意保养。
After reading the above article, do we know from the function and selection of the bearing of the self feeding mixer of gezhongke? From the above, we know that the bearing is a very important part, so we should pay attention to the maintenance when using it at ordinary times.
