自上料搅拌车厂家持续领跑者!

品质创造未来,让世界爱上中科聚峰造

全国咨询热线
400-879-1999
当前位置:首页 »新闻中心 » 常见问题 » 来聊一聊自上料搅拌车气缸破裂的预防?

来聊一聊自上料搅拌车气缸破裂的预防?

来源:https://www.jfjiaobanche.com 浏览:发表时间:2021-05-14
自上料搅拌车气缸的作用是将压缩空气的压力能转换为机械能,驱动机构作直线往复运动、摆动和旋转运动。在使用中有出现气缸破裂现象,导致无法实现其性能,故,我们应做好其防治措施。
The function of the cylinder of the self feeding mixer is to convert the pressure energy of the compressed air into mechanical energy, and the driving mechanism makes linear reciprocating motion, swing and rotary motion. In use, there is a cylinder rupture phenomenon, leading to its performance can not be achieved, so we should do its prevention and control measures.
自上料搅拌车如果气缸套出现破损,发动机在进气行程时会吸入冷却液,而在压缩行程和做功行程时高压气体又会从破损处进入冷却水道。无论出现哪一种情况,都将妨碍可燃混合气的形成和燃烧,甚至使发动机无法正常工作,将严重影响发动机的使用寿命。
               自上料搅拌车厂家
If the cylinder liner of self feeding mixer is damaged, the engine will inhale coolant during the intake stroke, and the high-pressure gas will enter the cooling channel from the damaged part during the compression stroke and power stroke. No matter what happens, it will hinder the formation and combustion of combustible mixture, and even make the engine unable to work normally, which will seriously affect the service life of the engine.
导致气缸破裂的因素很多,要防止气缸破裂,应该做到:发动机温度过高时,必须等发动机温度降低后,再加水发动;不得先起动发动机,后加冷却水,以免使气缸崩裂;在严寒条件下车,须放净冷却水,起动车时建议加热水起动;冬季停车若时间较长,又不能放水时,可间歇发动车辆,保持发动机有一定温度而不致于结冰,不得用喷灯或明火直接烤车,同时使用的冷却水要洁净。
There are many factors leading to cylinder rupture, to prevent cylinder rupture, we should do: when the engine temperature is too high, we must wait for the engine temperature to reduce, and then add water to start; Do not start the engine first, and then add cooling water, so as not to crack the cylinder; When getting off the train in severe cold conditions, it is necessary to drain the cooling water. When starting the train, it is recommended to start with heating water; In winter, if the parking time is long and the water can not be discharged, the vehicle can be started intermittently to keep the engine at a certain temperature without freezing. It is not allowed to use blowtorch or open fire to bake the car directly. At the same time, the cooling water used should be clean.
自上料搅拌车气缸破裂防治措施就为大家介绍到这里了,更多详情资讯请继续关注我们网站。
Since the feeding mixer cylinder rupture prevention measures are introduced here, more details please continue to pay attention to our website.