中科聚峰

自上料搅拌车行业持续领跑者!

品质创造未来,让世界爱上中科聚峰造

全国咨询热线
400-879-1999

产品推荐

0.5方自上料搅拌机
0.5方自上料搅拌机
产品介绍:
1.2方自上料搅拌机
1.2方自上料搅拌机
产品介绍:产品型号:JBC-1...
1.8方自上料搅拌机
1.8方自上料搅拌机
产品介绍:参数说明轴距:2...
2.6方自上料搅拌机
2.6方自上料搅拌机
产品介绍:参数说明轴距:2...
2.6同步旋转自上料搅拌机
2.6同步旋转自上料搅拌机
产品介绍:参数说明轴距:2...
2方后置驾驶室自上料搅拌机
2方后置驾驶室自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方D款自上料搅拌机
3.5方D款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方C款自上料搅拌机
3.5方C款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方B款自上料搅拌机
3.5方B款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方A款自上料搅拌机
3.5方A款自上料搅拌机
产品介绍:参数说明轴距:2...
4.0方自上料搅拌机
4.0方自上料搅拌机
产品介绍:参数说明轴距:2...
4方同步旋转自上料搅拌机
4方同步旋转自上料搅拌机
产品介绍:参数说明轴距:3...
5.5方自上料搅拌机
5.5方自上料搅拌机
产品介绍:参数说明轴距:3...
6.5方自上料搅拌机
6.5方自上料搅拌机
产品介绍:参数说明轴距:2...

资讯推荐

当前位置:首页 »中科搅拌机新闻 » 常见问题 » 自动上料搅拌车出现粘灌现象的原因?

自动上料搅拌车出现粘灌现象的原因?

来源:https://www.jfjiaobanche.com 浏览:发表时间:2020-08-19
  在日常使用自动上料搅拌车的时候会发现罐体越来越小了,原因就是没有清洗好是材料粘在罐壁了,接下来小编想为大家介绍的是自动上料搅拌车出现粘灌现象的原因。
  In the daily use of the automatic feeding mixer, we will find that the tank body is getting smaller and smaller. The reason is that the material is stuck on the tank wall. Next, Zhongke Jufeng manufacturer would like to introduce to you the reasons for the phenomenon.
  1、回厂检查罐内水量
  1. Return to the factory to check the water volume in the tank
  每次出车任务完成回到站内的时候,检查储水罐内的水量,让水罐中的水随时处于满罐的状态,以备不时之需。
  When returning to the station after the completion of the task, check the water volume in the water storage tank to make the water in the water tank full at any time in case of emergency.
  2、随车带上减水剂
  2. Bring water reducer with the vehicle
  减水剂是一种在维持混凝土坍落度不变的条件下,能减少拌合用水量的混凝土外加剂,随车携带,能对混凝土进行很好的调节。不过在加入减水剂的时候,一定要记得有商砼站化验室的人在场,否则混凝土质量强度不够,驾驶员要承担后果。
  Superplasticizer is a kind of concrete admixture which can reduce the mixing water under the condition of maintaining the concrete slump unchanged. It can be carried along with the vehicle and can adjust the concrete well. However, when adding water reducing agent, we must remember that there are people in the laboratory of commercial concrete station, otherwise the concrete quality strength is not enough, and the driver should bear the consequences.
  3、减少车辆行驶时间
  3. Reduce vehicle travel time
  混凝土运距一般在直径30千米范围以内,出车之前规划好路线以及车辆通行情况,尽量减少自动上料搅拌车在路上的时间。
  The concrete transportation distance is generally within the range of 30km in diameter. The route and vehicle traffic condition shall be well planned before the vehicle is sent out, so as to minimize the time of the automatic feeding mixer truck on the road.
             中科聚峰厂家
  4、离厂前检查混凝土质量
  4. Check the concrete quality before leaving the factory
  可能会因为原料的不同,每一盘混凝土质量都会有变化。在装好混凝土离场时,一定要检查罐内混凝土的塌落度情况以及和易度,小心混凝土的提前凝结和混凝土分层沉淀。
  Due to the different raw materials, the quality of each plate of concrete will change. When loading and leaving the site, it is necessary to check the slump and workability of the concrete in the tank, and be careful of the early setting of the concrete and the layered precipitation of the concrete.
  5、减少损失先卸料
  5. Reduce loss and unload first
  如果遇到人为因素或者不可抗因素,导致长时间无法卸料的情况,应随时查看罐内混凝土情况,一旦发现混凝土开始凝结。在报备负责人之后立刻进行卸料,以防整个罐体报废。
  If human factors or irresistible factors lead to long time unable to unload, check the concrete condition in the tank at any time, once the concrete starts to set. Discharge immediately after reporting to the person in charge to prevent the whole tank from being scrapped.
  以上就是自动上料搅拌车出现粘灌现象的原因,大家学会之后就能很大程度上避免这个问题,就可以提升自己的工作效率,减少物料损失啦。想要了解更多信息欢迎咨询官网。
  The above is the reason why the automatic feeding mixer appears sticky irrigation phenomenon. After you learn it, you can largely avoid this problem, and you can improve your work efficiency and reduce material loss. For more information, please consult the official website .