全自动搅拌车使用功能与进出料事项
搅拌车用途其实很广泛的，就是在搅拌车里搅拌好的材料运送到施工现场。下面来讲讲全自动搅拌车使用功能与进出料事项内容吧。
The mixer truck is actually widely used, that is, the materials mixed in the mixer truck are transported to the construction site. Now let's talk about the use function of the full-automatic mixer and the contents of the feeding and discharging matters.
搅拌车应安装在坚实平整的地面上，防止因地面下陷发生倾倒。
The mixer truck shall be installed on a solid and flat ground to prevent dumping due to ground subsidence.
在使用作业前，应按清洁、紧固、润滑、调整、防腐的程序检查机器各系统，并使之符合要求；有事故隐患必须及时。
Before operation, all systems of the machine shall be checked according to the procedures of cleaning, fastening, lubrication, adjustment and corrosion prevention, and shall meet the requirements; Potential accidents must be eliminated in time.
电力驱动的搅拌车，配电设备应安装适当的熔断器及接地装置，以确保电气系统的。
The power distribution equipment of the electrically driven mixer truck shall be installed with appropriate fuses and grounding devices to ensure the safety of the electrical system.
全自动搅拌车在运行中，勿使砂石落人机械的运转部分中去，否则，零件易被卡住而损坏。
During the operation of the full-automatic mixer truck, do not let the sand and gravel fall into the running part of the machine, otherwise, the parts are easy to be stuck and damaged.
进料斗升起后，斗下不得有人通过或停留。
After the feed hopper is raised, no one shall pass or stay under the hopper.
出料前不能无故停车，亦不能加料后启动。入料量不能超过规定容量。
It is not allowed to stop without reason before discharging or start after feeding. The feeding amount shall not exceed the specified capacity.
搅拌工作结束后，要及时清洗搅拌车，防止混凝土结块。清洗时，要防止电器设备受潮。清洗工作必须在断电后进行，以防止触电。
After mixing, the mixer truck shall be cleaned in time to prevent concrete from caking. During cleaning, the electrical equipment shall be protected from moisture. Cleaning must be carried out after power failure to prevent electric shock.
每次充电前用水冲洗进料口，使进料口在充电时保持湿润；
Wash the feed port with water before each charging to keep the feed port moist during charging;
装车的同时给随车自带的清洗水箱加水；
Add water to the cleaning water tank provided with the vehicle while loading;
全自动搅拌车装料后冲洗进料口，清理进料口附近残留的混凝土；
Wash the feed inlet after the automatic mixer truck is loaded, and clean the residual concrete near the feed inlet;
在施工现场卸料后，冲洗卸料槽，然后在混凝土储槽中加入30-40L的清洗水；车辆返回时，保持混凝土储罐向前缓慢转动；
After unloading at the construction site, wash the unloading tank, and then add 30-40l of cleaning water into the concrete storage tank; When the vehicle returns, keep the concrete storage tank rotating forward slowly;
下次装车前切记将混凝土储罐内的污水排出；
Remember to discharge the sewage in the concrete storage tank before the next loading;
每天结束时，彻底清洁混凝土储罐及进出口周围。自动上料搅拌车的清洁点确保没有水泥和混凝土结块。
At the end of each day, thoroughly clean the concrete storage tank and the area around the inlet and outlet. The cleaning point of the automatic loading mixer ensures that there is no cement and concrete caking.
全自动搅拌车厂家提醒您，选择搅拌车要结合生产规模的大小、施工场地的大小、配属设备的情况、管理功能、设备的技术性能、来决定选择搅拌车的类型，合适的产品，不但决定着工程的质量，更影响着整个工程的投资。其次还要了解供应商的信誉，更要通过各种途径了解同类产品的、性能、质量、服务等，进行比对，从而选择满意的产品。
The manufacturer of full-automatic mixer truck reminds you that the type of mixer truck should be selected in combination with the size of production scale, the size of construction site, the condition of equipment, management function, and technical performance of equipment. Appropriate products not only determine the quality of the project, but also affect the investment of the whole project. Secondly, it is necessary to understand the reputation of suppliers, as well as the price, performance, quality and service of similar products through various channels, so as to select satisfactory products.
全自动搅拌车使用功能与进出料事项相关内容就讲解到这里了，您可以关注我们网站www.jfjiaobanche.com咨询了解更多关于设备的使用事项。
That's all for the use functions of the automatic mixer truck and the related matters of feeding and discharging. You can follow our website www.jfjiaobanche Com for more information about the use of the device.
下一篇：搅拌车轮圈和轮胎的组合事项上一篇：自上料搅拌车驱动装置需要多维护
