自上料搅拌车厂家持续领跑者!

品质创造未来,让世界爱上中科聚峰造

全国咨询热线
400-879-1999
当前位置:首页 »新闻中心 » 公司新闻 » 自上料搅拌车厂家如何防止汽车高温情况!

自上料搅拌车厂家如何防止汽车高温情况!

来源:https://www.jfjiaobanche.com 浏览:发表时间:2021-11-12
1.防止发动机过热:由于环境温度高,发动机容易过热。有必要加强对发动机冷却系统的检查和维护。请注意,这包括检查水箱,恒温器,水泵,风扇等,并会及时检查。注意冷却水。如果水温超过100°C,请在凉爽的地方停下来冷却,使发动机空转并打开引擎盖以散热。
1. Prevent the engine from overheating: the engine is easy to overheat due to high ambient temperature. It is necessary to strengthen the inspection and maintenance of the engine cooling system. Please note that this includes checking the water tank, thermostat, water pump, fan, etc. and will be checked in time. Pay attention to cooling water. If the water temperature exceeds 100 ° C, stop in a cool place to cool, idle the engine and open the hood to dissipate heat.
2.防止发动机爆燃:夏季温度很高,有时会高于35°C。在这样的季节中,部分老化的汽车更有可能出现。因此要做好预防工作。
2. Prevent engine deflagration: the temperature is very high in summer, sometimes higher than 35 ° C. In this season, some aging cars are more likely to appear. Therefore, we should do a good job in prevention.
3.防止损坏汽车漆:暴露于强光下,汽车漆会老化并起皱,而普通美容蜡具有防晒作用,但汽车蜡中含有铋。因此,它是由长期的紫外线引起的。油漆生锈并留下黑点。蜡本身不能提高硬度和抗紫外线效果,但会因高温而迅速消失。停车时,请将车停在凉爽的地方。
自上料搅拌车厂家
3. Prevent damage to the car paint: when exposed to strong light, the car paint will age and wrinkle, while ordinary beauty wax has sunscreen effect, but the car wax contains bismuth. Therefore, it is caused by long-term ultraviolet radiation. The paint rusts and leaves black spots. Wax itself can not improve hardness and UV resistance, but it will disappear rapidly due to high temperature. When parking, please park your car in a cool place.
4.防止轮胎爆裂。如果温度过高,则容易发生爆胎,如果温度过高,则轮胎容易变形,拉伸强度降低。由于轮胎本身不是标准压力,因此可能导致车辆突然爆裂,从而导致轮胎老化,性能下降,或者在行驶时将轮胎滚动成硬质金属或其他硬物。
4. Prevent tire burst. If the temperature is too high, the tire is easy to burst. If the temperature is too high, the tire is easy to deform and the tensile strength is reduced. Since the tire itself is not the standard pressure, it may cause the vehicle to burst suddenly, resulting in tire aging and performance degradation, or rolling the tire into hard metal or other hard objects when driving.
5.防止发动机润滑故障:在高温下,机油粘度会降低,并且会发生润滑故障。因此,请检查机油质量并及时添加或更换机油。及时清洁机油滤清器和散热器,以确保机油平稳流动并充分散热,避免使发动机过载。
5. Prevent engine lubrication failure: under high temperature, the oil viscosity will decrease and lubrication failure will occur. Therefore, please check the oil quality and add or change the oil in time. Clean the oil filter and radiator in time to ensure the smooth flow of oil and sufficient heat dissipation, so as to avoid overloading the engine.
6.防止制动故障:在高温环境下,制动液容易蒸发和蒸发,在制动管内形成空气阻力。另外,刹车蹄很容易磨损,刹车会损坏。因此,应经常检查和调整制动系统。在长山上,您需要注意驻车制动器,以确保良好的制动性能。如果制动轮毂很热,请停止并冷却。
6. Prevent brake failure: in high temperature environment, the brake fluid is easy to evaporate and evaporate, forming air resistance in the brake pipe. In addition, the brake shoes are easy to wear and the brake will be damaged. Therefore, the braking system should be checked and adjusted frequently. On Changshan, you need to pay attention to the parking brake to ensure good braking performance. If the brake hub is hot, stop and cool.
以上就是今天给大家讲解的详细内容,更多的精彩内容请点击我们的网站自上料搅拌车厂家  https://www.jfjiaobanche.com,我们会有更多的精彩内容等您查看.
The above is the detailed content explained to you today. For more wonderful content, please click our website from the charging mixer manufacturer https://www.jfjiaobanche.com , we will have more wonderful content for you to see