自上料搅拌车厂家直销

品质创造未来,爱上中科聚峰造

全国咨询热线
400-879-1999
当前位置:首页 »新闻中心 » 公司新闻混凝土自上料搅拌车厂家磨合期这些问题不应忽视!

混凝土自上料搅拌车厂家磨合期这些问题不应忽视!

来源:https://www.jfjiaobanche.com 浏览:0发表时间:2021-06-02
小型混凝土搅拌车又被小型三轮搅拌车,具有进料快、卸料干净残余率少,车辆整体重 心低并且发生故障率小,搅拌罐罐体采用优良高合金钢耐磨材料制作,有效降低磨损,简单易维护,即使清洗罐体内部也很简单,操作方便,合理造型,匹配型动力组合,省油,承载能力强等特点。
The small concrete mixer is also used by the small three wheel mixer, which has the advantages of fast feeding, clean discharge, less residual rate, low overall center of gravity and low failure rate. The mixing tank body is made of excellent high alloy steel wear-resistant material, which can effectively reduce wear and easy maintenance. Even if the tank body is cleaned, it is also very simple, easy to operate, reasonable modeling and matching power combination, It has the characteristics of energy saving, fuel saving and strong bearing capacity.
每位司机朋友都知道我们购买的新车刚开始都会有一个阶段的磨合期,这个阶段是我们需要注意保养车辆的时候。而我们购买新的小型混凝土搅拌车也不可避免的也有这个阶段。
Every driver knows that the new car we buy will have a running in period at the beginning. This stage is when we need to pay attention to the maintenance of the car. And we buy new small concrete mixer also inevitably have this stage.
那么混凝土自上料搅拌车厂家就给大家讲解一下新购入的小型混凝土搅拌车在磨合期时,需要注意的一些问题:
Then the manufacturer of concrete self loading mixer will explain to you some problems that need to be paid attention to when the newly purchased small concrete mixer is in the running in period
1、新购买的小型混凝土搅拌车,使用半个月之后我们需要整车的固定螺栓紧固一遍,看看有没有松动的,特别是连接副梁和底盘之间的“U型”螺栓,其次是减速机与罐体之间的螺栓,紧固时,拧紧力矩应达到300-350Nm。
1. For the newly purchased small concrete mixer, after half a month's use, we need to tighten the fixed bolts of the whole vehicle to see if they are loose, especially the "U" bolts between the auxiliary beam and the chassis, followed by the bolts between the reducer and the tank. When tightening, the tightening torque should reach 300-350nm.
2、小型混凝土搅拌车的液压系统也是非常重要的,液压系统在我们初次使用250小时后要更换高压、抗磨液压油;并做到以后每累计使用到达2500小时左右就要更换一次,换油的时间间隔多不得超过一年,换油的同时较好更换散热器滤芯。
2. The hydraulic system of small concrete mixer truck is also very important. The hydraulic system should be replaced with high-pressure and anti-wear hydraulic oil 250 hours after our first use; In the future, it should be replaced every 2500 hours. The oil change interval should not exceed one year at most. It is better to replace the radiator filter element at the same time.
3、减速机初次使用250小时要更换重负荷的齿轮油,以后每隔2500小时更换一次,但是换油时间不得超过一年。
3. The gear oil with heavy load should be changed 250 hours after the reducer is first used, and then every 2500 hours, but the oil change time should not exceed one year.
             混凝土自上料搅拌车一台
4、小型混凝土搅拌车的搅拌罐每次卸完料都须用水清洗罐体内外及进出料装置,以防罐内粘过多的混凝土,一般在三个月左右就要进行一次彻 底的清理。
4. The inside and outside of the mixing tank and the feeding and discharging devices of the small concrete mixer truck must be cleaned with water after discharging each time, so as to prevent too much concrete sticking in the tank. Generally, a thorough cleaning should be carried out in about three months.
5、散热器温控开关是自动控制风扇的运转和停止的,不要随意的调动。小型搅拌车
5. Radiator temperature control switch is to automatically control the operation and stop of the fan, do not randomly adjust. Small mixer
6、在小型混凝土搅拌车正常使用过程中,当散热器真空表读数超过0.03兆帕时,应立即更换液压油和滤芯。罐体检查孔,就是“人孔”用于罐体内部维修的,必要时,可打开放出罐内的预拌混凝土。
6. In the normal use of small concrete mixer, when the reading of radiator vacuum gauge exceeds 0.03 MPa, the hydraulic oil and filter element should be replaced immediately. The manhole is used for the internal maintenance of the tank. If necessary, the ready mixed concrete in the tank can be opened and discharged.
7、托轮、卸油转轴、操纵系统等主要部件每周都需要加注润滑油,保障其灵活性。
7. The supporting wheel, oil unloading shaft, control system and other main parts need to be filled with lubricating oil every week to ensure their flexibility.
8、罐体检查孔,就是“人孔”用于罐体内部维修的,必要时,可打开放出罐内的预拌混凝土。
8. The manhole is used for the internal maintenance of the tank. If necessary, the ready mixed concrete in the tank can be opened and discharged.
9、小型混凝土搅拌车搅拌罐导轨与托轮之间的接触面每周需要加注润滑油。
9. The contact surface between guide rail and supporting wheel of small concrete mixer needs to be filled with lubricating oil every week.
10、连接底盘和液压泵之间的传动轴应每周加注润滑油。
10. The transmission shaft connecting the chassis and the hydraulic pump should be filled with lubricating oil every week.
感谢您的阅读,希望以上内容对您有所帮助,如您想了解更多精彩内容请点击我们的官网:混凝土自上料搅拌车一台https://www.jfjiaobanche.com
Thank you for reading, I hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: how much is a concrete self loading mixer https://www.jfjiaobanche.com .