自上料搅拌车厂家直销

品质创造未来,爱上中科聚峰造

全国咨询热线
400-879-1999
当前位置:首页 »新闻中心 » 公司新闻自动上料搅拌车厂家教的搅拌车熄火时的“急救”办法!

自动上料搅拌车厂家教的搅拌车熄火时的“急救”办法!

来源:https://www.jfjiaobanche.com 浏览:0发表时间:2020-11-26
自动上料搅拌车是建筑工地上的常见车,假如在运送过程中俄然熄火,会影响到作业进程和司机心情。因而搅拌车司机一定要把握搅拌车熄火时的“急救”办法。看看常用的应急方式有哪些?
Automatic feeding mixer is a common vehicle on the construction site. If the engine stops suddenly in the transportation process, it will affect the operation process and the driver's mood. Therefore, the mixer driver must grasp the "first aid" method when the mixer stops. What are the common emergency methods?
1、查看油流状况
1. Check oil flow
小型混凝土搅拌车熄火后,首要翻开油箱开关,拆下输油泵进油管,查看油流的状况,假如油流断断续续,阐明油路有问题。处理油路今后,运用手压泵排出其间的空气,拧开泵头的放气螺钉,气泡消失后再拧紧。
After the small concrete mixer stops, turn on the oil tank switch first, remove the oil inlet pipe of the oil pump, check the oil flow condition, if the oil flow is intermittent, clarify that there is a problem in the oil circuit. In the future, use the hand pump to exhaust the air between them, and screw off the air release screw of the pump head, and then tighten it after the bubble disappears.
                中科聚峰混凝土搅拌车
2、查看输油泵活塞和推杆
2. Look at the piston and push rod of the fuel transfer pump
在承认油流正常后,拆开油泵盖板,查看推杆是否灵敏,柱塞有无裂缝。假如一切正常,测验发动柴油机中速工作十分钟,仍呈现熄火状况时,敲击输油泵大螺帽,留意听柴油机的声响,假如声响反常,阐明输油泵活塞和推杆卡死,应及时修补替换。
After admitting that the oil flow is normal, remove the cover plate of the oil pump and check whether the push rod is sensitive and whether the plunger has cracks. If everything is normal, test the engine and work at medium speed for 10 minutes. When the engine still shows flameout, knock on the big nut of the fuel pump and listen to the noise of the diesel engine. If the sound is abnormal, it is clarified that the piston and push rod of the oil pump are stuck and should be repaired and replaced in time.
3、查看油嘴雾化状况
3. Check the atomization condition of oil nozzle
油嘴不雾化也或许导致搅拌车熄火。能够拆下油嘴总成查看敞开压力和雾化。假如油嘴总成没有问题,能够用油路旁接法进行实验,假如小型混凝土搅拌车依然熄火,应该就是发动机的问题。拆下喷油器总成,滚动曲轴,有水喷出,阐明缸盖、缸体存在裂纹,主张向柴油机的厂家反映。
If the nozzle does not atomize, it may also cause the mixer to stall. The nozzle assembly can be removed to check the opening pressure and atomization. If there is no problem with the nozzle assembly, the test can be carried out by the oil way side connection method. If the small concrete mixer still stops, it should be the engine problem. Remove the fuel injector assembly, roll the crankshaft, water gushes out, clarify that there are cracks in the cylinder head and cylinder block, and claim to report to the diesel engine manufacturer.
我们在使用自动上料搅拌机在行驶中也有这样一种常见的问题出现,在某些工作环境中,发动机水温必然太高。只要发生这种情况,就会对设备产生特别的影响。
We are using the automatic feeding mixer in the driving also has such a common problem, in some working environment, the engine water temperature must be too high. As long as this happens, it will have a special impact on the equipment.