自上料搅拌车厂家直销

品质创造未来,爱上中科聚峰造

全国咨询热线
400-879-1999
当前位置:首页 »新闻中心 » 公司新闻如何使混凝土搅拌车车轮更耐用

如何使混凝土搅拌车车轮更耐用

来源:https://www.jfjiaobanche.com 浏览:0发表时间:2020-06-19
  搅拌车轮胎是中科聚峰混凝土搅拌车运行的基本条件,合理使用搅拌轮胎,可以大大提高搅拌轮胎的使用寿命。如何让搅拌轮更耐用要注意以下几点:
  Mixer tire is the basic condition for the operation of Zhongke Jufeng concrete mixer. Reasonable use of the mixer tire can greatly improve the service life of the mixer tire. How to make the mixing wheel more durable should pay attention to the following points:
  1. 避免朝同一个方向移动
  1. Avoid moving in the same direction
  由于汽车的感觉不好,许多新手更喜欢当场驾驶。这个坏习惯基本上是驾校带来的。在原位方向上轮胎的磨损会集中在同一接触面上,导致轮胎局部严重磨损,缩短使用寿命。因此,驾驶员应避免在原位方向行驶,而应在车轮滚动方向行驶,在这种情况下,地面对汽车轮胎的搅拌是全范围和均匀的正常磨损。
中科聚峰混凝土搅拌车
  Because the car doesn't feel good, many novices prefer to drive on the spot. This bad habit is basically brought about by driving school. In the in-situ direction, the wear of the tire will be concentrated on the same contact surface, resulting in severe local wear of the tire and shortening the service life. Therefore, the driver should avoid driving in the original position direction, but should drive in the wheel rolling direction. In this case, the mixing of the ground to the car tire is full range and uniform normal wear.
  2. 避免撞到路肩和进入坑洼
  2. Avoid hitting shoulders and entering potholes
  有些司机的停车方式很霸道,他们喜欢把自行车停在路上,然后把车停在自己的肩膀上。搅拌机在骑在肩上的过程中,轮胎会被挤压,很容易导致轮胎侧帘线断裂,造成轮胎胀气。
  Some drivers are aggressive in their way of parking. They like to park their bikes on the road and then park them on their shoulders. When the mixer is riding on the shoulder, the tire will be squeezed, which is easy to cause the tire side cord to break, resulting in tire inflation.
  道路上的坑洞也应该避免。当搅拌器的轮胎穿过这个洞时,它也会挤压。洞越大,速度越快,轮胎被挤压得越厉害,这也会导致轮胎鼓起来。
  Potholes in the road should also be avoided. When the tires of the blender pass through the hole, it also squeezes. The bigger the hole, the faster the speed, the more the tyre is squeezed, which also causes the tyre to bulge.
  3.避免摩擦轮胎壁
  3. Avoid rubbing the tire wall
  很多时候,混音车在停车时无意中碰到轮胎壁,这可能是由于司机感觉不舒服或者是司机让开了路。搅拌轮胎的一侧属于轮胎的薄弱部位,严重的磨损还会造成轮胎胀气,带来轮胎穿孔的隐患。因此,司机停车时应注意混合器与肩台的距离,避免与胎壁摩擦。
  In many cases, the mixer accidentally touches the tire wall when parking, which may be due to the driver's discomfort or the driver's getting out of the way. One side of the agitated tire belongs to the weak part of the tire. Serious wear will cause tire inflation, which will lead to tire perforation. Therefore, the driver should pay attention to the distance between the mixer and the shoulder to avoid friction with the tire wall.
  4. 保持适当的胎压
  4. Maintain proper tire pressure
  适当的胎压可以保证混炼机轮胎地面面积均匀,减少不必要的磨损。因此,司机应养成定期检查胎压的习惯,随时跟踪胎压。你可以去的修理店测试轮胎的气压,或者你可以买一个轮胎压力表来测试自己。胎压标准可参考混合车的胎压标签。
  Proper tire pressure can ensure the uniform ground area of the mixer tire and reduce unnecessary wear. Therefore, the driver should develop the habit of regularly checking the tire pressure and tracking the tire pressure at any time. You can go to a professional repair shop to test the tire pressure, or you can buy a tire pressure gauge to test yourself. The tire pressure standard can refer to the tire pressure label of the hybrid vehicle.
  5. 夏天不降低胎压吗
  5. Don't you reduce tire pressure in summer
  许多司机错误地认为,在夏季高温时,低胎压可以防止轮胎漏气。这样,搅拌轮胎与地面之间的接触面就会增大,摩擦力就会增大,加速轮胎的磨损,并会导致搅拌轮胎温度升高更快,更容易刺穿。因此,在夏季保持正常的胎压。
  Many drivers mistakenly believe that low tire pressure can prevent the tire from leaking when it is hot in summer. In this way, the contact surface between the agitated tire and the ground will increase, the friction will increase, the wear of the tire will be accelerated, and the temperature of the agitated tire will rise faster, and it is easier to puncture. Therefore, maintain normal tire pressure in summer.
  以上是中科聚峰混凝土搅拌车厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:https://www.jfjiaobanche.com
  The above is the relevant content introduced by the manufacturer of Zhongke Jufeng concrete mixer for you. To learn more, please visit the website: https://www.jfjiaobanche.com