自上料搅拌车的搅拌轴不转的原因
在生产过程中当自上料搅拌车上下来时，搅拌轴停止转动或转动有点慢是正常现象，如果这种情况先停止检查，看是否有以下三种情况。
In the production process, when getting off from the loading mixer, it is normal for the mixing shaft to stop rotating or rotate a little slowly. If this situation occurs, stop the inspection first to see if there are the following three situations.
1. 电机驱动皮带松了吗?
1. Is the motor drive belt loose?
自拌混凝土搅拌车的电机驱动皮带过松，也会导致商品混凝土搅拌车搅拌轴转动缓慢或停止转动，电机驱动皮带过松，导致功率传递不足。
The motor drive belt of the self mixing concrete mixer is too loose, which will also cause the mixing shaft of the commercial concrete mixer to rotate slowly or stop rotating, and the motor drive belt is too loose, resulting in insufficient power transmission.
2. 是否有严重超载?
2. Is there serious overload?
自拌混凝土搅拌器的搅拌轴超过正常工作负荷时，搅拌轴转动缓慢。如果负荷过大，会导致搅拌轴停止或搅拌轴弯曲。
When the mixing shaft of self mixing concrete mixer exceeds the normal working load, the mixing shaft rotates slowly. If the load is too large, it will cause the mixing shaft to stop or bend.
3.搅拌叶片或侧叶片与管内壁之间是否有较大的异物?
3. Is there any large foreign matter between the mixing blade or side blade and the inner wall of the tube?
这种情况也会使混凝土搅拌车自动送料搅拌车的搅拌轴停止转动或转动缓慢。搅拌桨叶或侧桨叶与罐体内壁之间有较大的异物，也会导致搅拌轴停止。搅拌叶片或侧叶片与罐体内壁之间的间隙过大，尤其是卵石，是导致异物堵塞的原因。
In this case, the mixing shaft of the automatic feeding mixer of the concrete mixer stops rotating or rotates slowly. There are large foreign matters between the mixing blade or side blade and the inner wall of the tank body, which will also cause the mixing shaft to stop. The excessive gap between the mixing blade or side blade and the inner wall of the tank, especially the pebble, is the cause of the blockage of foreign matters.
以上文章由中科自上料搅拌车公司小编整理，如果您想了解更多关于中科聚峰厂家的相关信息，请关注本网站https://www.jfjiaobanche.com。
The above articles are compiled and sorted out by the company. If you want to know more about the manufacturer of Zhongke Jufeng, please pay attention to this website https://www.jfjiaobanche.com 。
