自上料搅拌车厂家持续领跑者!

品质创造未来,让世界爱上中科聚峰造

全国咨询热线
400-879-1999
当前位置:首页 »新闻中心 » 新闻资讯 » 中科聚峰搅拌机安装调试步骤你了解吗?

中科聚峰搅拌机安装调试步骤你了解吗?

来源:https://www.jfjiaobanche.com 浏览:发表时间:2020-04-10
  当我们在中科聚峰搅拌机的安装工作,调试,是非常重要的一部分必须能够忽略,如果你不知道如何做之前还是随着小编先深入了解,在那之后你不需要担心没有以正确的方法进行安装调试。
  When we install and debug the mixer in Zhongke, it is a very important part that must be ignored. If you don't know how to do it before or with the editor, you don't need to worry about not installing and debugging in the right way after that.
  干粉砂浆包装机安装的设计和选择与搅拌课程的目标密切相关。不同的搅拌工艺需要通过不同的搅拌安装和操作来完成。在设计选型中,首先根据搅拌过程的目标和要求确定搅拌器的类型、功率和搅拌速度,然后选择减速机、机架、搅拌轴和轴封。具体步骤如下:
中科聚峰搅拌机
  The design and selection of the installation of the dry mortar packaging machine is closely related to the objectives of the mixing course. Different mixing processes need to be completed by different mixing installation and operation. In the design and selection, the type, power and mixing speed of the mixer are determined according to the objectives and requirements of the mixing process, and then the reducer, frame, mixing shaft and shaft seal are selected. The specific steps are as follows:
  1. 根据工艺前提、搅拌目的和要求,选择搅拌器类型。在选择搅拌器类型时,要充分掌握搅拌器的动态特性、搅拌器在搅拌过程中的运动规律以及各种搅拌目的之间的因果关系。
  1. Select the mixer type according to the process premise, mixing purpose and requirements. When choosing the type of agitator, we should fully grasp the dynamic characteristics of the agitator, the motion law of the agitator in the mixing process and the causal relationship between various mixing purposes.
  2. 根据确定搅拌器类型和运动形式的搅拌机在搅拌的过程中,这个过程需要控制的混合时间、沉降速度和分散度,电力,搅拌器的搅拌速度和直径决定的实现技巧和会计的模仿设计机器。
  2. According to the type and movement of the mixer in the process of mixing, this process needs to control the mixing time, settling speed and dispersion, the power, the mixing speed and diameter of the mixer to determine the implementation skills and the accounting simulation design machine.
  3.根据电机功率、搅拌速度和工艺条件,从选型表中选择减速机型号。假设根据实际工作转矩选择减速器,实际工作转矩应小于减速器允许的转矩。
  3. According to the motor power, mixing speed and process conditions, select the reducer model from the selection table. Assuming that the reducer is selected according to the actual working torque, the actual working torque should be less than the allowable torque of the reducer.
  4. 根据减速机的输出轴头d和搅拌轴系的支承方式,选择与d型号规格相同的机架和联轴器。
  4. According to the output shaft head D of the reducer and the supporting mode of the mixing shaft system, select the same frame and coupling as the model D.
  5. 根据机架搅拌轴头的do尺寸、设备的密封空间、任务压力和任务温度选择轴封类型。
  5. Select the shaft seal type according to the do size of the mixing shaft head of the rack, the sealing space of the equipment, the task pressure and the task temperature.
  6. 根据设备模式和施工要求,设计选择搅拌轴的结构型式,并对其强度和刚度进行校核。
  6. According to the equipment mode and construction requirements, design and select the structure type of mixing shaft, and check its strength and rigidity.
  7. 根据搅拌轴的机架、齿条类型和压力等级的正常尺寸DN,选择设备底盖、法兰底座或法兰。
  7. Select equipment bottom cover, flange base or flange according to the frame, rack type and normal size DN of pressure grade of mixing shaft.
  8. 根据支架和防振前提,确定设备是否能支撑支架。
  8. Determine whether the equipment can support the support according to the support and anti vibration premise.
  在上述选择过程中,可参考干粉砂浆包装机的搅拌安装组合及设备。在设备加工过程中,各部件之间连接轮毂的尺寸是轴头的尺寸。
  In the above selection process, you can refer to the mixing installation combination and equipment of the dry mortar packaging machine. In the process of equipment processing, the size of connecting hub between components is the size of shaft head.
  以上是中科聚峰搅拌机厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:https://www.jfjiaobanche.com
  The above is the relevant content introduced by Zhongke Jufeng blender manufacturer. To learn more, please visit the website: https://www.jfjiaobanche.com