中科聚峰

自上料搅拌车行业持续领跑者!

品质创造未来,让世界爱上中科聚峰造

全国咨询热线
400-879-1999

产品推荐

0.5方自上料搅拌机
0.5方自上料搅拌机
产品介绍:
1.2方自上料搅拌机
1.2方自上料搅拌机
产品介绍:产品型号:JBC-1...
1.8方自上料搅拌机
1.8方自上料搅拌机
产品介绍:参数说明轴距:2...
2.6方自上料搅拌机
2.6方自上料搅拌机
产品介绍:参数说明轴距:2...
2.6同步旋转自上料搅拌机
2.6同步旋转自上料搅拌机
产品介绍:参数说明轴距:2...
2方后置驾驶室自上料搅拌机
2方后置驾驶室自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方D款自上料搅拌机
3.5方D款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方C款自上料搅拌机
3.5方C款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方B款自上料搅拌机
3.5方B款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方A款自上料搅拌机
3.5方A款自上料搅拌机
产品介绍:参数说明轴距:2...
4.0方自上料搅拌机
4.0方自上料搅拌机
产品介绍:参数说明轴距:2...
4方同步旋转自上料搅拌机
4方同步旋转自上料搅拌机
产品介绍:参数说明轴距:3...
5.5方自上料搅拌机
5.5方自上料搅拌机
产品介绍:参数说明轴距:3...
6.5方自上料搅拌机
6.5方自上料搅拌机
产品介绍:参数说明轴距:2...

资讯推荐

当前位置:首页 »中科搅拌机新闻 » 新闻资讯 » 如何减少中科聚峰混凝土搅拌车的磨损

如何减少中科聚峰混凝土搅拌车的磨损

来源:https://www.jfjiaobanche.com 浏览:发表时间:2020-03-10
  中科聚峰混凝土搅拌车应用广泛,在使用混凝土搅拌机时,磨损是不可避免的,磨损会影响设备的生产效率,所以在生产过程中重要的一点就是尽量减少混凝土搅拌机的磨损。
  Zhongke Jufeng concrete mixer is widely used. When using concrete mixer, abrasion is inevitable, which will affect the production efficiency of the equipment. Therefore, the most important point in the production process is to minimize the abrasion of concrete mixer.
  初次个是混凝土搅拌机的润滑,有很多的润滑需求,润滑剂的方法和数量是不一样的,有时还需要更换一个新的润滑剂,也需要定期、定量假润滑剂,用户必须理解这些润滑技术,以确保混凝土搅拌机的润滑。
  The first is the lubrication of concrete mixer. There are a lot of lubrication requirements. The method and quantity of lubricants are different. Sometimes, a new lubricant needs to be replaced. It also needs regular and quantitative fake lubricants. Users must understand these lubrication technologies to ensure the lubrication of concrete mixer.
中科聚峰
  混凝土搅拌机易磨损的部位有振动筛、搅拌叶片、搅拌面和搅拌筒。如何减少这些地方的磨损?振动筛磨损和振动轴承时,用户必须选用优质轴承,润滑装置要合理,用户必须经常对轴承进行润滑;由于搅拌桨需要搅拌混凝土,一般磨损严重,要求用户在添加材料时注意避免搅拌缸内较大的硬物或钢丝等物体,并经常对搅拌桨进行维护;混凝土搅拌表面磨损的可能原因有微震、滑动、冲击、磨损、锈蚀等。这就要求使用者在使用时要注意,避免碰撞,保持表面清洁。搅拌桶也经常磨损,这就要求用户在工作结束后立即清洗搅拌桶,防止搅拌桶内的混凝土凝固。
  The easily worn parts of concrete mixer include vibrating screen, mixing blade, mixing surface and mixing drum. How to reduce the wear of these places? When the vibrating screen is worn and the vibrating bearing is worn, the user must select the high-quality bearing, the lubricating device must be reasonable, and the user must often lubricate the bearing; As the mixing paddle needs to mix concrete, the general wear is serious. Users are required to pay attention to avoid large hard objects or steel wires and other objects in the mixing cylinder when adding materials, and often maintain the mixing paddle; the possible causes of concrete mixing surface wear are micro vibration, sliding, impact, wear, corrosion, etc. This requires users to pay attention to avoid collision and keep the surface clean. The mixing bucket is often worn, which requires the user to clean the mixing bucket immediately after the end of work to prevent the concrete in the mixing bucket from setting.
  以上是中科聚峰混凝土搅拌车厂家为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:https://www.jfjiaobanche.comThe above is the relevant content introduced by the manufacturer of Zhongke Jufeng concrete mixer for you. To learn more, please visit the website: https://www.jfjiaobanche.com