自上料搅拌车厂家持续领跑者!

品质创造未来,让世界爱上中科聚峰造

全国咨询热线
400-879-1999
当前位置:首页 »新闻中心 » 新闻资讯 » 检查搅拌车磨损你有哪些技巧?

检查搅拌车磨损你有哪些技巧?

来源:https://www.jfjiaobanche.com 浏览:发表时间:2021-10-03
熔化百剑而成,柄芒不分,攻守不定。形又细又长,可藏于竹竿中,一旦出鞘寒光闪现,颤动如飞瀑流水,因而得名---天瀑剑!自动上料搅拌车犹如一把天瀑剑,集上料、搅拌于一体,可智能配料上料,还能自动装载搅拌,是真正的一体机,小巧、灵活、省时、省力、省场地!对于它的磨损检查也有一定的严格要求,具体是什么呢?不妨我们一起去看看吧!
It is made by melting hundreds of swords. The handle and awn are not divided, and the attack and defense are uncertain. It is thin and long and can be hidden in a bamboo pole. Once it is out of the sheath, the cold light flashes and vibrates like a waterfall. Therefore, it is named Tianbao sword! The automatic feeding mixer is like a heavenly waterfall sword, which integrates feeding and mixing. It can intelligently feed and automatically load and mix. It is a real all-in-one machine, small, flexible, time-saving, labor-saving and site-saving! There are certain strict requirements for its wear inspection. What are the specific requirements? Let's go and have a look!
首先,针对搅拌车的具体磨损情况,我们应观察机油颜色、品质方面是否出现问题,观察外表是否存在铁屑,检查机油粘性。若机油中存在很多铁屑,则说明曲轴瓦、连杆瓦位置出现严重磨损情况。若机油呈现粘稠状态,说明机油已经有很长时间却未经过更换。
混凝土自上料搅拌车厂家
Firstly, according to the specific wear of the mixer truck, we should observe whether there are problems in the color and quality of the engine oil, observe whether there are iron filings on the surface, and check the viscosity of the engine oil. If there are a lot of iron filings in the engine oil, it indicates that the crankshaft bearing bush and connecting rod bush are seriously worn. If the oil is viscous, it means that the oil has not been changed for a long time.
在拆开连杆活塞的曲轴时,观察连杆瓦、曲轴瓦具体状况,整机均不可使用。若磨损情况不严重,可让其经过磨轴加工后,自动上料搅拌车方可使用。
When disassembling the crankshaft of connecting rod piston, observe the specific conditions of connecting rod pad and crankshaft pad. The whole machine can not be used. If the wear is not serious, the automatic feeding mixer can be used only after grinding the shaft.
观察气缸套的具体磨损情况,在拆开缸套时,禁止打到发动机机体,避免出现严重损坏情况。
Observe the specific wear of the cylinder liner. When disassembling the cylinder liner, it is forbidden to hit the engine body to avoid serious damage.
对于自动上料搅拌车来说,在整个维修期间,每个动作都应谨慎小心,任何一个细节的错误都会致使发动机不能达到正常工作状态,因此在对自动上料搅拌车维修时,应请的技术人员进行,避免出现更大失误。
For the automatic feeding mixer truck, each action should be careful during the whole maintenance period. Any error in any detail will cause the engine to fail to reach the normal working state. Therefore, professional technicians should be invited to repair the automatic feeding mixer truck to avoid greater mistakes.