混凝土自上料搅拌车厂家

自上料搅拌车厂家持续领跑者!

品质创造未来,让世界爱上中科聚峰造

全国咨询热线
400-879-1999
当前位置:首页 »新闻中心 » 新闻资讯 » 自上料搅拌车轮胎在平时运营中的注意事宜有哪些?

自上料搅拌车轮胎在平时运营中的注意事宜有哪些?

来源:https://www.jfjiaobanche.com 浏览:发表时间:2021-04-14
自上料搅拌车轮胎在平时运营中的注意事宜有哪些?
What are the matters needing attention in the normal operation of Zhongke self loading mixer tire?
1、车胎的配搭和组装
1. Tire matching and assembly
中科自上料搅拌车轮胎组装得恰当与否可以直接关联到车胎的使用期,尤其是在拆换新车胎的时候。种类和纹路不一样的车胎,因为各车胎的具体规格和复合工作能力不一样,一定不能随意混放。除此之外,假如您自身还无法充分把握拆换车胎的技能,我们建议您还是到专 业的轮胎店或是车子特邀检修商处开展拆换。
Whether the tires are properly assembled or not is directly related to the service life of the tires, especially when the tires are replaced. Tires with different types and patterns must not be mixed at will because the specific specifications and composite working ability of each tire are different. In addition, if you still can't fully grasp the professional skills of tire removal and replacement, we suggest that you go to a professional tire shop or a specially invited car repairer to carry out tire removal and replacement.
2、工作标准气压
2. Working standard air pressure
司机要依照汽车底盘厂商的规定值给车胎打气。当胎压高过规定值时,因车胎接地总面积降低,单位工作压力提高,使车胎胎面中间毁坏提升,另外扩大了车胎刚度,使车轮遭受的动载负荷提升,非常容易导致胎体崩裂。当胎压假如小于规定值时,车胎胎肩的毁坏大幅度扩大;因此要依照厂商得出的规定值给车胎打气。
The driver should inflate the tire according to the specified value of the chassis manufacturer. When the tire pressure is higher than the specified value, due to the reduction of the total ground area of the tire and the increase of the unit working pressure, the middle of the tire tread is damaged and lifted. In addition, the stiffness of the tire is expanded, and the dynamic load of the wheel is increased, which is very easy to cause the carcass cracking. If the tire pressure is less than the specified value, the damage of the tire shoulder will be greatly expanded; therefore, the tire should be inflated according to the specified value obtained by the manufacturer.
               中科自上料搅拌车
3、尽可能挑选在很好的地面驾驶
3. Choose to drive on good ground as much as possible
在路面检修工程施工路段驾驶时,应使用低速档缓行挑选地面的方法经过,防止车胎遭受过度撞击,乃至被扎伤或刮伤;在凸凹不平的路面上驾驶,一要挑选地面,缓解车胎与地面的撞击,防止机械部件及车胎的毁坏;二是要降速缓行,防止车胎晃动和明显振动;经过泥地路段,应挑选较稳固、不滑的地区经过,以防车胎凹陷、原地空转、剧烈生热导致车胎及胎侧严重划伤、刮伤。
When driving in the construction section of road maintenance engineering, the method of selecting the ground at low speed should be used to prevent the tire from being excessively impacted, or even bruised or scratched; when driving on the uneven road, firstly, the ground should be selected to alleviate the impact between the tire and the ground, and prevent the damage of mechanical parts and tires; secondly, the speed should be slowed down to prevent the tire from shaking and obvious vibration; thirdly, the vehicle should be driven on the uneven road; When passing through the mud road section, a relatively stable and non slippery area should be selected to avoid serious scratch and scratch on the tire and sidewall caused by tire depression, in-situ idling and severe heat generation.
4、合理操纵驾驶的速度
4. Control driving speed reasonably
车子拐弯时要依据弯道的实时路况、拐弯的半径,要恰当降速,因为惯性力和向心力的作用,会加快单侧车胎损坏;车子下坡时,应依据坡度的大小、长短及地面状况,操纵恰当的车速,如此能够防止或者少用紧急制动,降低车胎损坏;车子在驾驶途中停车和到站停车,应培养可靠滑行的习惯。
When turning a corner, the car should slow down appropriately according to the real-time road conditions and turning radius of the curve, because the inertia force and centripetal force will accelerate the damage of one side tire; when the car goes downhill, it should control the appropriate speed according to the size and length of the slope and the ground conditions, so as to prevent or reduce the use of emergency braking and reduce tire damage; the car stops and arrives at the station on the way When parking, we should cultivate the habit of reliable taxiing.
感谢您的阅读,希望以上内容对您有所帮助,如您想了解更多精彩内容请点击我们的官网:自上料搅拌车https://www.jfjiaobanche.com
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: Zhongke self loading mixer https://www.jfjiaobanche.com .