中科聚峰

自上料搅拌车行业持续领跑者!

品质创造未来,让世界爱上中科聚峰造

全国咨询热线
400-879-1999

产品推荐

0.5方自上料搅拌机
0.5方自上料搅拌机
产品介绍:
1.2方自上料搅拌机
1.2方自上料搅拌机
产品介绍:产品型号:JBC-1...
1.8方自上料搅拌机
1.8方自上料搅拌机
产品介绍:参数说明轴距:2...
2.6方自上料搅拌机
2.6方自上料搅拌机
产品介绍:参数说明轴距:2...
2.6同步旋转自上料搅拌机
2.6同步旋转自上料搅拌机
产品介绍:参数说明轴距:2...
2方后置驾驶室自上料搅拌机
2方后置驾驶室自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方D款自上料搅拌机
3.5方D款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方C款自上料搅拌机
3.5方C款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方B款自上料搅拌机
3.5方B款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方A款自上料搅拌机
3.5方A款自上料搅拌机
产品介绍:参数说明轴距:2...
4.0方自上料搅拌机
4.0方自上料搅拌机
产品介绍:参数说明轴距:2...
4方同步旋转自上料搅拌机
4方同步旋转自上料搅拌机
产品介绍:参数说明轴距:3...
5.5方自上料搅拌机
5.5方自上料搅拌机
产品介绍:参数说明轴距:3...
6.5方自上料搅拌机
6.5方自上料搅拌机
产品介绍:参数说明轴距:2...

资讯推荐

当前位置:首页 »中科搅拌机新闻 » 新闻资讯 » 中科搅拌机定期检查油雾装置的可靠性并及时清洗!

中科搅拌机定期检查油雾装置的可靠性并及时清洗!

来源:https://www.jfjiaobanche.com 浏览:发表时间:2020-07-30
使用混凝土搅拌机时,请注意压力问题。 如果混凝土搅拌机的压力太大,就要注意这一点。 停止使用它。 这样可以避免一些事故,并设法将混凝土搅拌机的压力恢复到正常水平。 以下是小编针对此问题提出的一些解决方案。
Please pay attention to the pressure when using the concrete mixer. If the pressure of the concrete mixer is too high, we should pay attention to this point. Stop using it. This can avoid some accidents and try to restore the pressure of concrete mixer to normal level. Here are some solutions to this problem.
中科搅拌机是这样一种机器,其中带有叶片的轴在圆筒中旋转,或者可以混合和混合各种材料以形成混合物或合适的稠度。 混合机类型很多,包括强制混合机,单轴混合机和两轴混合机。
A Zhongke mixer is a machine in which a shaft with blades rotates in a cylinder or can mix and mix various materials to form a mixture or a suitable consistency. There are many types of mixers, including forced mixer, single shaft mixer and two shaft mixer.
如果混凝土搅拌机在运行过程中承受过大的压力,则过滤器很容易堵塞并且损坏了搅拌机。 因此,在使用混凝土搅拌机时,请注意压力范围,以免由于搅拌机超压而导致某些故障。
If the concrete mixer is under excessive pressure during operation, the filter is easy to block and damage the mixer. Therefore, when using the concrete mixer, please pay attention to the pressure range, so as to avoid some faults caused by the overpressure of the mixer.
           中科搅拌机
随着混凝土搅拌机压力的缓慢升高,过滤器通常会堵塞,应定期清洁。 两者都是气缸问题,因为气缸外部存在泄漏。 水稳定的混合工位通常是由于活塞杆组件的疼痛,缺乏润滑供应,密封件和密封件的磨损或损坏,气缸中的杂质以及活塞杆上的划痕引起的。
As the pressure of the concrete mixer increases slowly, the filter is usually blocked and should be cleaned regularly. Both are cylinder problems because there is leakage outside the cylinder. Water stable mixing stations are usually caused by pain in the piston rod assembly, lack of lubrication supply, wear or damage to seals and seals, impurities in the cylinder and scratches on the piston rod.
我们需要及时调整活塞杆的中间位置,定期检查油雾装置的可靠性,并及时清洗。 由于导电电磁阀的发展,该阀出现了故障,排气模式被简单地阻塞,形成了密封,并且有源阀卡在了电路故障中。 使用调音台时,我们可以使用整个工作站的封闭式设计。 搅拌机的压力是将间隔件和隔离室添加到混凝土搅拌机中。
We need to adjust the middle position of the piston rod in time, regularly check the reliability of the oil mist device, and clean it in time. Due to the development of the conductive solenoid valve, the valve fails, the exhaust mode is simply blocked, forming a seal, and the active valve is stuck in the circuit fault. When using the mixer, we can use the closed design of the entire workstation. The pressure of the mixer is to add spacer and isolation chamber to the concrete mixer.
另外,混凝土搅拌机的噪声源主要是搅拌主体。 对于机械设备,主要的噪音问题是机器本身的问题,从而提高了自身的生产水平和技术水平。 研究了该位置的制造精度,并开发了一种可行且完善的加工方案,以大程度地减少设备组件之间的间隙,尤其是叶片和主搅拌机垫片之间的间距应尽可能小,以防止结石。 声音变得清晰。
In addition, the main noise source of concrete mixer is the mixing body. For mechanical equipment, the main noise problem is the problem of the machine itself, thus improving its own production level and technical level. The manufacturing accuracy of this position was studied, and a feasible and perfect processing scheme was developed to reduce the gap between equipment components to a large extent, especially the distance between blade and main mixer gasket should be as small as possible to prevent stones. The sound became clear.
以上是关于混凝土搅拌机定期检查油雾装置的可靠性并及时清洗的相关内容介绍,希望对大家有所帮助,想要了解更多内容欢迎点击我们的中科搅拌机https://www.jfjiaobanche.com官网。
The above is about the concrete mixer regularly check the reliability of the oil mist device and clean it in time. I hope it will help you. If you want to know more, please click our Zhongke mixer https://www.jfjiaobanche.com Official website.