混凝土搅拌车构造简略、操作便当，但是作业中也有很多小疑问出现。虽然是小疑问，我们也要找个原因，彻 底。盲目检查不只糟蹋时间而且还不一定能彻 底铲除。对于混凝土搅拌车正常作业时不卸料的缺点，我们给你几个检查方法，看终究是什么原因构成的。

The structure of concrete mixer is simple and easy to operate, but there are many small questions in the operation. Although it's a small question, we need to find a reason and solve it thoroughly. Blind inspection not only wastes time, but also may not be eradicated completely. For the shortcomings of concrete mixer truck not unloading during normal operation, we will give you a few inspection methods to see what is the cause after all.

混凝土搅拌车的在出产过程中，遇到不卸料的表象，很多用户当遇到这种缺点时，一般都会认为是混凝土搅拌车出现缺点了，会去检查搅拌车，检查后发现 混凝土搅拌车并没有缺点，这样就糟蹋了出产时间。 混凝土搅拌车在正常情况下，搅拌时间到零后搅拌车遇自动卸料，但是在出产过程中按下了操作台上的暂停按钮后到了搅拌时间，搅拌车没有卸料。这时候要先检查 混凝土搅拌车的卸料门上的电磁阀，看电磁阀是不是损坏，电磁阀损坏了卸料门就会打不开，搅拌车天然不会卸料，需要对电磁阀进行修理。若不是电磁阀的缺点时就需要检查操作台上的暂停按钮是不是按下，若没有按下就按下。若操作台上的按钮也没有疑问就需要检查计算机的监控界面，看监控界面上的阻止出料控制是不是被，若被当即吊销。若以上都没有疑问就是 混凝土搅拌车坏掉了，就需要对搅拌车进行检查。
                           

In the production process of concrete mixer, the appearance of no unloading is encountered. When many users encounter this kind of defect, they generally think that the concrete mixer has defects, and they will check the mixer. After checking, they find that the concrete mixer has no defects, which wastes the production time. Under normal conditions, when the mixing time reaches zero, the concrete mixer will discharge automatically. However, when the pause button on the operation platform is pressed in the production process, the mixer will not discharge when the mixing time is up. At this time, it is necessary to check the solenoid valve on the discharge door of the concrete mixer first to see if the solenoid valve is damaged. If the solenoid valve is damaged, the discharge door will not open. The mixer will not discharge naturally, so the solenoid valve needs to be repaired. If it is not the defect of the solenoid valve, you need to check whether the pause button on the console is pressed. If not, press it. If there is no doubt about the button on the console, you need to check the monitoring interface of the computer to see if the stop discharge control on the monitoring interface is activated. If it is activated, it will be revoked immediately. If there is no doubt that the concrete mixer is broken, it is necessary to check the mixer.

以上内容就是混凝土搅拌车厂家带来的介绍，感谢您的阅读，希望以上内容对您有所帮助，如您想了解更多精彩内容请点击我们的官网：自上料搅拌车厂家https://www.jfjiaobanche.com。

The above content is the introduction of concrete mixer manufacturer, thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: from loading mixer manufacturer https://www.jfjiaobanche.com .