中科聚峰

自上料搅拌车行业持续领跑者!

品质创造未来,让世界爱上中科聚峰造

全国咨询热线
400-879-1999

产品推荐

0.5方自上料搅拌机
0.5方自上料搅拌机
产品介绍:
1.2方自上料搅拌机
1.2方自上料搅拌机
产品介绍:产品型号:JBC-1...
1.8方自上料搅拌机
1.8方自上料搅拌机
产品介绍:参数说明轴距:2...
2.6方自上料搅拌机
2.6方自上料搅拌机
产品介绍:参数说明轴距:2...
2.6同步旋转自上料搅拌机
2.6同步旋转自上料搅拌机
产品介绍:参数说明轴距:2...
2方后置驾驶室自上料搅拌机
2方后置驾驶室自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方D款自上料搅拌机
3.5方D款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方C款自上料搅拌机
3.5方C款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方B款自上料搅拌机
3.5方B款自上料搅拌机
产品介绍:参数说明轴距:2...
3.5方A款自上料搅拌机
3.5方A款自上料搅拌机
产品介绍:参数说明轴距:2...
4.0方自上料搅拌机
4.0方自上料搅拌机
产品介绍:参数说明轴距:2...
4方同步旋转自上料搅拌机
4方同步旋转自上料搅拌机
产品介绍:参数说明轴距:3...
5.5方自上料搅拌机
5.5方自上料搅拌机
产品介绍:参数说明轴距:3...
6.5方自上料搅拌机
6.5方自上料搅拌机
产品介绍:参数说明轴距:2...

资讯推荐

当前位置:首页 »中科搅拌机新闻 » 行业动态 » 搅拌机运行过程中为什么会出现抱轴现象?

搅拌机运行过程中为什么会出现抱轴现象?

来源:https://www.jfjiaobanche.com 浏览:发表时间:2020-05-13
  当你在使用搅拌机的过程中,如果遇到抱轴的现象,一定要及时找出具体原因,这样才能快速解决,以免影响你的正常工作。但是从哪里开始呢?下面的内容是对中科搅拌机运行过程中出现的抱轴现象进行分析。
  When you use the mixer, if you encounter the phenomenon of shaft holding, you must find out the specific reasons in time, so as to solve it quickly, so as not to affect your normal work. But where to start? The following content is to analyze the axle holding phenomenon in the operation process of the mixer in Sinology.
  近年来,随着我国经济的快速发展,公路、铁路和城市道路创建项目计划扩大,越来越多的公司的建筑市场逐步扩大,中标项目不断增加与支持设备已经添加项目,几乎所有的项目都需要用混凝土,混凝土搅拌站,混凝土施工项目,机械施工的部分。综合考虑各方面因素,大部分工程都采用了自建混凝土搅拌站的方法。由于现场施工时间长,条件很差,在生产过程中,拌和厂设备经常出现一些缺点,如处理不及时,会严重影响工程的施工进度和质量。
中科搅拌机
  In recent years, with the rapid development of China's economy and the expansion of plans for road, railway and urban road construction projects, the construction market of more and more companies has gradually expanded. The number of bid winning projects and supporting equipment has been increased. Almost all projects need to use the first part of concrete, concrete mixing station, concrete construction project and mechanical construction. Considering all factors, most of the projects adopt the method of self built concrete mixing plant. Due to the long construction time and poor conditions, in the production process, the mixing plant equipment often has some shortcomings, such as the treatment is not timely, which will seriously affect the construction progress and quality of the project.
  是什么原因使搅拌机保持轴?搅拌机的托轴是在搅拌过程中,将粉末、沙子和液体混合而成的一种粘合剂。它粘附在搅拌轴和搅拌臂上,在其表面形成一种非常厚的、难以追踪的粘着剂。
  What causes the mixer to keep its shaft? The supporting shaft of the mixer is an adhesive made by mixing powder, sand and liquid during the mixing process. It adheres to the mixing shaft and the mixing arm, forming a very thick and hard to trace adhesive on its surface.
  随着工程项目的不断增多,与工程项目密切相关的搅拌机的应用也越来越广泛,而搅拌机作为搅拌设备的心脏,对搅拌机的科学规划和应用有着非常重要的作用。科学选择搅拌机的工作参数,规划结构,可实际推进工程功率,降低公司的成本。分析了搅拌机的工作机理,论述了搅拌机参数选择的原则,并对搅拌机方案和应用的科学性作了评述。
  With the increasing number of engineering projects, the mixer, which is closely related to the engineering projects, is widely used. As the heart of the mixing equipment, the mixer plays a very important role in the scientific planning and application of the mixer. Scientific selection of working parameters and structure of mixer can actually promote the project power and reduce the cost of the company. This paper analyzes the working mechanism of mixer, discusses the principle of selecting mixer parameters, and makes a key comment on the scheme and application of mixer.
  混凝土强度的均匀性和颜色是混合的质疑的主要原因,缺乏一致性,能够充分混合均匀,搅拌时间的联系较大,现有相关规范的规则中使用的混合时基之前的规范控制的需要,与高性能混凝土技术的发展,特别是大剂量的矿物掺合料的使用,现有的规则不能满足混凝土搅拌均匀性时间控制的需要。因此,本文讨论了不同掺混时间对不同等级混凝土的含气量、坍落度、粗骨料相对误差和砂浆密度相对误差的影响。毕竟,它决定了合理的混合时间和各目标的相对误差控制范围。
  The uniformity and color of concrete strength are the main reasons for the query of mixing. The lack of consistency, the ability to fully mix evenly, and the greater connection between mixing time, the need for specification control before the mixing time base used in the existing rules of relevant specifications, and the development of high-performance concrete technology, especially the use of large doses of mineral admixtures, The existing rules can not meet the needs of time control of concrete mixing uniformity. Therefore, this paper discusses the influence of different mixing time on the air content, slump, relative error of coarse aggregate and relative error of mortar density of different grades of concrete. After all, it determines the reasonable mixing time and the relative error control range of each target.
  一般搅拌机在运行过程中出现持轴现象都是由以上这些因素造成的,相信大家看了之后就知道如何解决了。
  Generally, the phenomenon of shaft holding in the operation of mixer is caused by the above factors. I believe you will know how to solve it after reading it.
  以上是中科搅拌机小编为大家介绍的相关内容,想要了解更多内容,欢迎访问网站:https://www.jfjiaobanche.comThe above is the relevant content introduced by Zhongke blender. To learn more, please visit the website: https://www.jfjiaobanche.com