全自动搅拌车厂家讲解设备轮胎相关内容
全自动搅拌车是由多个参数决定的，不可能用任何一个参数来描述全自动搅拌车。因为它经常行驶在不同的道路上，所以在轮胎方面会有一定的要求。它对轮胎有什么要求？轮胎的更换是怎么样的？
Automatic mixer is determined by many parameters, it is impossible to use any one parameter to describe the automatic mixer. Because it often drives on different roads, there will be certain requirements in terms of tires. What does it require of tyres? What about tire replacement?
全自动搅拌车对轮胎有什么要求？
What are the tire requirements of the fully automatic mixer?
能承受足够的载荷和速度，并能保证足够的可靠性、性和抗侧倾能力；全自动搅拌车轮胎具有良好的纵向和横向路面附着力性能，有利于搅拌车的通过性和操控性。稳定;滚动阻力小，行驶噪音低；额定胎压保持时间长，气密性好；良好的径向柔韧性、缓冲特性和减震能力，有利于乘坐舒适性和平稳性等；全自动搅拌车轮胎磨损均匀，耐磨性好，抗老化，使用寿命长，低廉；质量和转动惯量小，均匀性和质量平衡性好；足够的空间来安装刹车。
Can withstand sufficient load and speed, and can ensure sufficient reliability, safety and anti-roll capacity; Fully automatic agitator tires have good longitudinal and transverse road adhesion performance, which is conducive to the agitator's passability and handling. Stable; Low rolling resistance, low driving noise; Rated tire pressure holding time is long, good air tightness; Good radial flexibility, buffering characteristics and shock absorption capacity, is conducive to ride comfort and stability, etc. Automatic agitator tires wear uniform, good wear resistance, anti-aging, long service life, low price; Small mass and rotational inertia, good uniformity and mass balance; Enough space to install the brakes.
因为轮胎经常和路面接触，加上需要承载全自动搅拌车的重量，所以我们在选择轮胎的时候一定要慎重，一定要选择质量好，使用时间长，承载能力强的轮胎。
Because tires are often in contact with the road and need to carry the weight of the automatic mixer, we must be careful when choosing tires. We must choose tires with good quality, long service time and strong bearing capacity.
全自动搅拌车轮胎的更换是怎么样的？
What is the tire replacement of automatic agitator?
胎面花纹的厚度一定要大于1.6毫米，全自动搅拌车厂家认为如果你经常驾车行驶在摩擦力低的湿滑路面上，能保证胎面花纹厚度是上述数值的两倍。全自动搅拌车胎面花纹磨损指示线，当磨损到达一定程度这些隐藏在胎面沟壑中的指示线就呈现出来。胎面花纹磨损指示线为扁平的橡胶条，与胎面纵向垂直镶嵌在胎面沟壑中。如果轮胎上的几乎所有指示线都清晰可见，意味着你需要尽快更换轮胎了。
Tread pattern thickness must be greater than 1.6mm, automatic mixer manufacturers believe that if you often drive on a wet road with low friction, can ensure that tread pattern thickness is twice the above value. Fully automatic mixing of tread pattern wear indicator line, when the wear reaches a certain degree these hidden in the tread groove of the indicator line will appear. Tread pattern wear indicator line is flat rubber strip, and the tread is vertically and vertically embedded in the tread groove. If almost every indicator line on your tire is clearly visible, it means you need to change your tire as soon as possible.
全自动搅拌车厂家讲解设备轮胎相关内容便是以上了，设备轮胎的维护和保养工作一定要做好，不然非常容易就会在行驶过程中出现问题，造成危险隐患的存在，那么更多内容大家就来这里www.jfjiaobanche.com咨询吧。
The maintenance and maintenance of equipment tires must be done well, or it is very easy to have problems in the process of driving, causing the existence of dangerous hidden dangers, so more content we come here www.jfjiaobanche.com consultation.
